We made a whole secret room; together with a wall, a wardrobe, and a secret lock system! Come see how you are able to do the identical in your home. This video was sponsored by Lowe’s. Discover out extra in regards to the Multi-Max 50 which helped carry this undertaking to life at https://low.es/2V8SBUt
HOW TO MAKE A SECRET BOOKCASE: https://www.youtube.com/watch?v=V3NGBo2M1Ps&t=6s
SOLDERING // BITS: https://www.youtube.com/watch?v=1qqh0GkTonc
DOOR LOCK CODE: https://github.com/iliketomakestuff/iltms_secret_door_magnetic_lock
TOOLS & SUPPLIES (affiliate hyperlinks):
Dremel Multi-Max 50: https://low.es/2V8SBUt
Type Choices Floating Shelf: https://low.es/2VGIKVm
Utilitech Recessed Lights: https://low.es/2PEFXXg
Kreg Accu-Reduce System: https://low.es/2LhkCEN
Tapcon Anchors and Bit: https://low.es/2PHbRm2
LeGrand Outlet w/USB: https://low.es/2PQocoh
Jeld-Wen Hole Core Door: https://low.es/2GXMHNm
Electromagnet: https://www.amazon.com/dp/B00JERC00S?tag=ilik-20
Southwire 14ga. Wire Bundle: https://low.es/2VduZOH
Adjustable Gang Field: https://low.es/2vz739a
ESP8266 Micro-Controller Board: https://www.amazon.com/dp/B07BGCF3NY?tag=ilik-20
Paint Colours: Partitions: Reflection by Sherwin-Williams. Wardrobe: Water’s Edge by Valspar
https://equipment.co/iliketomakestuff/my-woodworking-tools
https://equipment.co/iliketomakestuff/shop-safety-gear
MUSIC: http://share.epidemicsound.com/iltms
This undertaking was meant to separate a protracted room in Josh’s completed basement. The intent was to make a non-load bearing wall that minimize the lengthy room right into a bed room within the entrance and a secret workplace area within the again. To make it enjoyable, Josh designed a nook wardrobe that you might stroll by way of. To maintain out little children and so as to add to the key attract, the doorway would lock and unlock with a hidden swap.
Constructing the wall is fairly simple. We used 2×4 studs minimize to match the peak of the room and span from one facet to the opposite. I additionally needed to go away sufficient room on one finish for the doorway. The wall studs had been nailed in place each 16 inches and secured to the ground utilizing Tapcon anchors. We researched the dangers of inserting a brand new wall over the carpet, and Josh determined that it was a greater possibility than eradicating the carpet in that space and including new tack strips.
As a result of we meant on operating new lighting into the workplace, Josh ran wiring by way of an current soffit and down by way of the wall on a brand new circuit. This manner, we may tough in a light-weight swap and two retailers within the new wall. We added 3 new low-profile recessed lights into the room which made the area way more usable when blocked off from the remainder of the room.
Now that the wall was up, we had so as to add the door that might additionally act because the again panel within the wardrobe. We bought a clean, hollow-core door from Lowe’s and a pack of hinges. I did not get a pre-hung door as a result of these doorways are centered throughout the hooked up door jams. Our door wants to sit down flush up in opposition to the doorway so there would not be a bizarre recessed again panel within the wardrobe.
Josh added some mortices to the door’s edge to simply accept the three hinges. I needed to do the identical factor to the door jam spacer that we created. I screwed this spacer on to the wall stud and hung the door in place.
To cover your entire opening, we designed a nook wardrobe with two doorways and a few hanging hooks on the within. Josh wished to make it possible for the wardrobe was useful and inconspicuous, not giving anybody a motive to know that there was one thing occurring behind the piece. He drafted up a minimize listing utilizing Fusion 360 and we minimize the objects out in Josh’s store.
A lot of the wardrobe could be framing parts to help the 2 entrance doorways. As a result of it was located within the nook, one again panel could be the beforehand current facet wall and the opposite could be our newly put in door. To cover the seams, we used 1×4 boards to make “trim” on the within and 1x6s to jut out from the wall and help the entrance doorways. Josh used 1/4″ plywood strips so as to add ornamental trim to the one panel doorways so as to add some character. The door panels had been minimize in a single piece and hinged to the body. There is no such thing as a backside trim on the doorways so you do not have to step over something to enter the key room.
*To learn extra, go to https://iliketomakestuff.com/how-to-make-a-secret-room-through-a-wardrobe
Subscribe: http://bit.ly/ILikeToMakestuffSubscribe
Take a look at my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideos
Be taught 3d modeling, get digital plans, and funky merch at
Wish to help ILTMS? Get unique content material and extra…
http://www.iliketomakestuff.com/patreon
FOLLOW:
http://instagram.com/iliketomakestuff
http://twitter.com/iliketomakestuff
http://fb.com/iltms
#ILikeToMakeStuff
How you can Make a Secret Room (Via a Wardrobe) | I Like To Make Stuff
I Like To Make Stuff
http://www.youtube.com/Iliketomakestuff
source